Last updated on 2026-08-01 23:50:59 CEST.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 0.4.2 | 10.39 | 113.70 | 124.09 | OK | |
| r-devel-linux-x86_64-debian-gcc | 0.4.2 | 8.29 | 86.03 | 94.32 | NOTE | |
| r-devel-linux-x86_64-fedora-clang | 0.4.2 | 18.00 | 153.66 | 171.66 | OK | |
| r-devel-linux-x86_64-fedora-gcc | 0.4.2 | 8.00 | 72.85 | 80.85 | OK | |
| r-devel-windows-x86_64 | 0.4.2 | 12.00 | 103.00 | 115.00 | ERROR | |
| r-patched-linux-x86_64 | 0.4.2 | 8.14 | 105.50 | 113.64 | OK | |
| r-release-linux-x86_64 | 0.4.2 | 9.59 | 119.33 | 128.92 | OK | |
| r-release-macos-arm64 | 0.4.2 | 3.00 | 33.00 | 36.00 | OK | |
| r-release-macos-x86_64 | 0.4.2 | 8.00 | 147.00 | 155.00 | OK | |
| r-release-windows-x86_64 | 0.4.2 | 12.00 | 101.00 | 113.00 | ERROR | |
| r-oldrel-macos-arm64 | 0.4.2 | 3.00 | 32.00 | 35.00 | OK | |
| r-oldrel-macos-x86_64 | 0.4.2 | 8.00 | 137.00 | 145.00 | OK | |
| r-oldrel-windows-x86_64 | 0.4.2 | 18.00 | 142.00 | 160.00 | ERROR |
Version: 0.4.2
Check: for new files in some other directories
Result: NOTE
Found the following files/directories:
‘~/tmp/scratch/Rtmp0eq9qD’ ‘~/tmp/scratch/Rtmp0tNUaO’
‘~/tmp/scratch/Rtmp1qYPdH’ ‘~/tmp/scratch/Rtmp20y8FE’
‘~/tmp/scratch/Rtmp2FR5pZ’ ‘~/tmp/scratch/Rtmp2Hvb3b’
‘~/tmp/scratch/Rtmp3h105k’ ‘~/tmp/scratch/Rtmp3z6txd’
‘~/tmp/scratch/Rtmp4lmfnz’ ‘~/tmp/scratch/Rtmp4m2ajZ’
‘~/tmp/scratch/Rtmp5gacyK’ ‘~/tmp/scratch/Rtmp6dZ5f0’
‘~/tmp/scratch/Rtmp6qrf6N’ ‘~/tmp/scratch/Rtmp8CyjnF’
‘~/tmp/scratch/Rtmp8IGIk5’ ‘~/tmp/scratch/Rtmp9BaXeX’
‘~/tmp/scratch/Rtmp9HKmHb’ ‘~/tmp/scratch/Rtmp9K3zJy’
‘~/tmp/scratch/RtmpABsF5n’ ‘~/tmp/scratch/RtmpALzMeO’
‘~/tmp/scratch/RtmpAPzwUx’ ‘~/tmp/scratch/RtmpBVjYky’
‘~/tmp/scratch/RtmpBwYAoS’ ‘~/tmp/scratch/RtmpDJqCQH’
‘~/tmp/scratch/RtmpDgGn5G’ ‘~/tmp/scratch/RtmpDz8L0X’
‘~/tmp/scratch/RtmpEMRZVT’ ‘~/tmp/scratch/RtmpENA0DR’
‘~/tmp/scratch/RtmpEXnoGN’ ‘~/tmp/scratch/RtmpEXyYqn’
‘~/tmp/scratch/RtmpEhAMrJ’ ‘~/tmp/scratch/RtmpEumvr8’
‘~/tmp/scratch/RtmpF490dy’ ‘~/tmp/scratch/RtmpGikT5E’
‘~/tmp/scratch/RtmpH8gSVC’ ‘~/tmp/scratch/RtmpHITIjr’
‘~/tmp/scratch/RtmpHUbg6G’ ‘~/tmp/scratch/RtmpHeNQ17’
‘~/tmp/scratch/RtmpHeVyVH’ ‘~/tmp/scratch/RtmpIsG3Xo’
‘~/tmp/scratch/RtmpIxIWkg’ ‘~/tmp/scratch/RtmpJ4ZlF4’
‘~/tmp/scratch/RtmpJFShAB’ ‘~/tmp/scratch/RtmpKS9e7H’
‘~/tmp/scratch/RtmpKT84iv’ ‘~/tmp/scratch/RtmpKXCcEU’
‘~/tmp/scratch/RtmpKjpsqx’ ‘~/tmp/scratch/RtmpL1U2LE’
‘~/tmp/scratch/RtmpL38Npc’ ‘~/tmp/scratch/RtmpLWt5ys’
‘~/tmp/scratch/RtmpLYyoE5’ ‘~/tmp/scratch/RtmpN3rFPS’
‘~/tmp/scratch/RtmpNHLEdv’ ‘~/tmp/scratch/RtmpO5T5IA’
‘~/tmp/scratch/RtmpOXEvoV’ ‘~/tmp/scratch/RtmpP9EXr1’
‘~/tmp/scratch/RtmpQEncft’ ‘~/tmp/scratch/RtmpRUSa63’
‘~/tmp/scratch/RtmpRls2Z7’ ‘~/tmp/scratch/RtmpRqDRTi’
‘~/tmp/scratch/RtmpS8gi6h’ ‘~/tmp/scratch/RtmpSA3QW2’
‘~/tmp/scratch/RtmpSDUnnC’ ‘~/tmp/scratch/RtmpSaAtPU’
‘~/tmp/scratch/RtmpT2qUrv’ ‘~/tmp/scratch/RtmpT76dKA’
‘~/tmp/scratch/RtmpUp05PR’ ‘~/tmp/scratch/RtmpUsmfJu’
‘~/tmp/scratch/RtmpV68OLw’ ‘~/tmp/scratch/RtmpW6m5hu’
‘~/tmp/scratch/RtmpWtX6pj’ ‘~/tmp/scratch/RtmpWxdiGK’
‘~/tmp/scratch/RtmpX4crtj’ ‘~/tmp/scratch/RtmpXUTLbo’
‘~/tmp/scratch/RtmpXzfQk5’ ‘~/tmp/scratch/RtmpYoTbrr’
‘~/tmp/scratch/RtmpYq97yT’ ‘~/tmp/scratch/RtmpZ6wOlH’
‘~/tmp/scratch/RtmpZnavOi’ ‘~/tmp/scratch/Rtmpa0VONS’
‘~/tmp/scratch/Rtmpas0Ce6’ ‘~/tmp/scratch/RtmpbiDxs1’
‘~/tmp/scratch/Rtmpbqf9k9’ ‘~/tmp/scratch/RtmpcDAivP’
‘~/tmp/scratch/RtmpcYj0Qg’ ‘~/tmp/scratch/RtmpcdxZoC’
‘~/tmp/scratch/RtmpclSO23’ ‘~/tmp/scratch/RtmpcqvADC’
‘~/tmp/scratch/RtmpcvzuFT’ ‘~/tmp/scratch/RtmpdztOJQ’
‘~/tmp/scratch/Rtmpekd9hv’ ‘~/tmp/scratch/RtmpfNkbeu’
‘~/tmp/scratch/Rtmpg4ejyn’ ‘~/tmp/scratch/RtmpgSW3K6’
‘~/tmp/scratch/RtmpgYGFmT’ ‘~/tmp/scratch/RtmpgzSokD’
‘~/tmp/scratch/RtmphItAsz’ ‘~/tmp/scratch/RtmphPwn6n’
‘~/tmp/scratch/RtmphaEoik’ ‘~/tmp/scratch/RtmphzwVoP’
‘~/tmp/scratch/Rtmpi8BlOZ’ ‘~/tmp/scratch/RtmpiF3Gnc’
‘~/tmp/scratch/RtmpkUZ9Qh’ ‘~/tmp/scratch/RtmpkY1F8j’
‘~/tmp/scratch/RtmpkzsLeK’ ‘~/tmp/scratch/RtmplBLl0g’
‘~/tmp/scratch/RtmpldtX7S’ ‘~/tmp/scratch/RtmplqQzBd’
‘~/tmp/scratch/RtmpmHSZsR’ ‘~/tmp/scratch/RtmpmRssoy’
‘~/tmp/scratch/RtmpnjCDHM’ ‘~/tmp/scratch/Rtmpo4ESc9’
‘~/tmp/scratch/Rtmpoz19yT’ ‘~/tmp/scratch/Rtmpp7vh9n’
‘~/tmp/scratch/RtmpqmDNXi’ ‘~/tmp/scratch/RtmprUSqHU’
‘~/tmp/scratch/RtmprhXsZY’ ‘~/tmp/scratch/Rtmpsiylsi’
‘~/tmp/scratch/RtmpspS4io’ ‘~/tmp/scratch/Rtmpt0G4au’
‘~/tmp/scratch/RtmptXb8PM’ ‘~/tmp/scratch/RtmptbP5Qp’
‘~/tmp/scratch/RtmptmFvpv’ ‘~/tmp/scratch/RtmpuSL6yd’
‘~/tmp/scratch/RtmpvBqD08’ ‘~/tmp/scratch/RtmpvIYnQB’
‘~/tmp/scratch/RtmpvTcEsg’ ‘~/tmp/scratch/RtmpwUkjV6’
‘~/tmp/scratch/RtmpxfoRu1’ ‘~/tmp/scratch/RtmpxnRrXo’
‘~/tmp/scratch/RtmpynQRGr’ ‘~/tmp/scratch/RtmpzXmnGT’
‘~/tmp/scratch/RtmpzdcJiN’ ‘~/tmp/scratch/cckdySvp.s’
‘~/tmp/scratch/xvfb-run.4MwjLo’ ‘~/tmp/scratch/xvfb-run.4TNRat’
‘~/tmp/scratch/xvfb-run.5NYv1Z’ ‘~/tmp/scratch/xvfb-run.5mwVHe’
‘~/tmp/scratch/xvfb-run.7y5xgc’ ‘~/tmp/scratch/xvfb-run.8lvZKE’
‘~/tmp/scratch/xvfb-run.914m0W’ ‘~/tmp/scratch/xvfb-run.97yr9l’
‘~/tmp/scratch/xvfb-run.C13EOL’ ‘~/tmp/scratch/xvfb-run.FXiqQx’
‘~/tmp/scratch/xvfb-run.Heetia’ ‘~/tmp/scratch/xvfb-run.Iu7pW1’
‘~/tmp/scratch/xvfb-run.LRDFfX’ ‘~/tmp/scratch/xvfb-run.LxuxO9’
‘~/tmp/scratch/xvfb-run.MCTurP’ ‘~/tmp/scratch/xvfb-run.Mvooxa’
‘~/tmp/scratch/xvfb-run.MxRWG6’ ‘~/tmp/scratch/xvfb-run.NbEyXw’
‘~/tmp/scratch/xvfb-run.Nk7ewv’ ‘~/tmp/scratch/xvfb-run.RntAwe’
‘~/tmp/scratch/xvfb-run.SMMgj9’ ‘~/tmp/scratch/xvfb-run.SvoRu4’
‘~/tmp/scratch/xvfb-run.TPSQhR’ ‘~/tmp/scratch/xvfb-run.U9c3bk’
‘~/tmp/scratch/xvfb-run.VtyTKW’ ‘~/tmp/scratch/xvfb-run.W77Gk8’
‘~/tmp/scratch/xvfb-run.WsDjil’ ‘~/tmp/scratch/xvfb-run.Wvs9qX’
‘~/tmp/scratch/xvfb-run.XE3AIt’ ‘~/tmp/scratch/xvfb-run.Xk5KP1’
‘~/tmp/scratch/xvfb-run.bBmTXX’ ‘~/tmp/scratch/xvfb-run.bMJCbb’
‘~/tmp/scratch/xvfb-run.c3IOkz’ ‘~/tmp/scratch/xvfb-run.cp4HMg’
‘~/tmp/scratch/xvfb-run.ejh1rf’ ‘~/tmp/scratch/xvfb-run.f8NDgL’
‘~/tmp/scratch/xvfb-run.fSbi7G’ ‘~/tmp/scratch/xvfb-run.gYNFSN’
‘~/tmp/scratch/xvfb-run.gw0kwQ’ ‘~/tmp/scratch/xvfb-run.ibFi3H’
‘~/tmp/scratch/xvfb-run.j2icQb’ ‘~/tmp/scratch/xvfb-run.kPVsLL’
‘~/tmp/scratch/xvfb-run.kwbzUi’ ‘~/tmp/scratch/xvfb-run.l92XpW’
‘~/tmp/scratch/xvfb-run.lrI8Qz’ ‘~/tmp/scratch/xvfb-run.mMymZC’
‘~/tmp/scratch/xvfb-run.mpp336’ ‘~/tmp/scratch/xvfb-run.q5nLos’
‘~/tmp/scratch/xvfb-run.qYGsdg’ ‘~/tmp/scratch/xvfb-run.sduI4B’
‘~/tmp/scratch/xvfb-run.vKMKt8’ ‘~/tmp/scratch/xvfb-run.vOU63h’
‘~/tmp/scratch/xvfb-run.wj9swK’ ‘~/tmp/scratch/xvfb-run.xVeFa5’
‘~/tmp/scratch/xvfb-run.xh1Gsb’ ‘~/tmp/scratch/xvfb-run.zJ7kEF’
‘~/tmp/scratch/xvfb-run.zlgebF’
Flavor: r-devel-linux-x86_64-debian-gcc
Version: 0.4.2
Check: tests
Result: ERROR
Running 'testthat.R' [17s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(xpose.nlmixr2)
Loading required package: xpose
Loading required package: ggplot2
Attaching package: 'xpose'
The following object is masked from 'package:stats':
filter
>
> test_check("xpose.nlmixr2")
i parameter labels from comments will be replaced by 'label()'
> loading into symengine environment...
> pruning branches (`if`/`else`) of full model...
v done
> calculate d(f)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> calculate d(R^2)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling inner model...
v done
> finding duplicate expressions in FD model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling EBE model...
v done
> compiling events FD model...
v done
rxode2 5.1.5 using 2 threads (see ?getRxThreads)
no cache: create with `rxCreateCache()`
Flavor: r-devel-windows-x86_64
Version: 0.4.2
Check: tests
Result: ERROR
Running 'testthat.R' [16s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(xpose.nlmixr2)
Loading required package: xpose
Loading required package: ggplot2
Attaching package: 'xpose'
The following object is masked from 'package:stats':
filter
>
> test_check("xpose.nlmixr2")
i parameter labels from comments will be replaced by 'label()'
> loading into symengine environment...
> pruning branches (`if`/`else`) of full model...
v done
> calculate d(f)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> calculate d(R^2)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling inner model...
v done
> finding duplicate expressions in FD model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling EBE model...
v done
> compiling events FD model...
v done
rxode2 5.1.5 using 2 threads (see ?getRxThreads)
no cache: create with `rxCreateCache()`
Flavor: r-release-windows-x86_64
Version: 0.4.2
Check: tests
Result: ERROR
Running 'testthat.R' [23s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(xpose.nlmixr2)
Loading required package: xpose
Loading required package: ggplot2
Attaching package: 'xpose'
The following object is masked from 'package:stats':
filter
>
> test_check("xpose.nlmixr2")
i parameter labels from comments will be replaced by 'label()'
> loading into symengine environment...
> pruning branches (`if`/`else`) of full model...
v done
> calculate d(f)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> calculate d(R^2)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling inner model...
v done
> finding duplicate expressions in FD model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling EBE model...
v done
> compiling events FD model...
v done
rxode2 5.1.5 using 2 threads (see ?getRxThreads)
no cache: create with `rxCreateCache()`
Flavor: r-oldrel-windows-x86_64